The ULTRA Air Blaster Mini delivers the same power and performance as its bigger brother, the Ultra Air Blaster, but with a smaller footprint. Use it to unleash a high-velocity vortex of air that blasts dirt, sand, and debris from carpets, upholstery, plastics, and even buffing pads.

Built from rugged components, it's designed for durability and long-term use. Easily disassemble and reassemble it without worrying about cracks or damage. This trigger-operated tool features a removable trumpet and bearing set for quick maintenance and hassle-free cleaning.

Pro Tip: For best results, use with a 20-gallon or larger air compressor to maintain consistent airflow.

Why You’ll Love It:

• High-performance in a compact package
• Fits in hard-to-reach areas
• Removable cone and bearings for easy cleaning

What’s Included:

• High-velocity air gun
• Removable cone
• 3 air fittings – US, Euro, and Japanese Standard

Perfect for Exterior & Interior Detailing on:

• Carpets
• Upholstery
• Plastics
• Blowing out Buffing Pads

Air Blaster V2 & Mini Maintenance Plan

Ensure long-lasting performance and avoid preventable issues like bearing seizure and moisture damage by following the routine maintenance steps below.

Monthly Maintenance Checklist

• Lubricate Mechanical Parts:
  Apply a few drops of WD-40 or similar lubricant into the bearing assembly. Use waterproof grease on the trigger mechanism. Pulse with air and pull the trigger several times to work the grease in.
• Use an Inline Moisture Filter:
  Always connect the tool to a filtered air source. Desiccant or coalescing filters are best.
• Purge the Air Compressor Tank:
  Use the valve at the bottom to release built-up moisture. Leave open until the next use.
• Inspect Nozzle and Air Path:
  Ensure no debris or buildup is blocking airflow.
• Check PSI and SCFM:
  Tool functions best between 90–100 PSI and at least 4.0 SCFM.
• Clean the Exterior:
  Wipe down regularly to prevent grime buildup.

After Each Use:

• Purge Residual Moisture:
  Run the tool for a few seconds to clear internal condensation.
• Purge the Air Compressor Tank:
  Open the valve at the bottom of your air compressor tank and leave it open until the next use. This prevents moisture buildup inside the tank.
• Proper Storage:
  Store the tool with the nozzle facing downward so moisture drains away from internal parts.
• Disconnect Air Supply:
  Detach hose to prevent pressure damage or accidental activation.

Replacement Parts V2 Only & Mini

The V2 model includes serviceable components. If bearings begin to wear (e.g., the tool stops spinning or emits a grinding sound), replace them using the official bearing kit. This extends the tool's life and avoids full unit replacement.